Loading... Please wait...

Our Newsletter

Physio-Control LIFEPAK Express Defibrillator

  • Image 1
$60.00 (Fixed shipping cost)
Bookmark and Share

Product Description

The Physio-Control LIFEPAK Express Defibrillator (#80427-000134) is a first response defibrillator when responding to an SCA (Sudden Cardiac Arrest) patient. This Express Defibrillator is designed for any first responder to use, whether its a bystander or a coworker, and no emergency training is required. 

Warranty: 5 Years.

The Physio-Control LIFEPAK Express Defibrillator is a simplified defibrillator that can be operated by any untrained responder in a cardiac emergency. This device is equipped with both visual cues and voice prompts that guide the user through each step of defibrillation. It's a low-profile, simple design that won't cause any confusion as well as being light and compact.

The initial shock to a patient is set at 200 joules, with the ability to increase to 360 joules if needed for patients who need more intense  defibrillation. The device is also equipped with a readiness indicator so users know when this device is prepared for use or needs to be replaced.

Physical Characteristics

  • Height: 4.2 in (10.7 cm).
  • Width: 8 in (20.3 cm).
  • Depth: 9.5 in (24.1 cm), excluding handle.
  • Weight: 4.5 lb (2 kg) with CHARGE-PAK battery charger and electrodes.


  • Waveform: Biphasic truncated exponential, with voltage and current duration compensation for patient impedance.
  • Output Energy Sequence: Multiple levels, configurable from 150 joules to 360 joules. Factory default settings of 200J, 300J, 360J.
  • Output Energy Accuracy: ±10% into 50 ohms, ±15% into 25 to 100 ohms.
  • Shock Advisory System: An ECG analysis system that advises whether a shock is appropriate; meets rhythm recognition criteria specified in DF39. The device charges for shock only when the Shock Advisory System advises defibrillation.
  • Device Capacity: Twenty (20) full discharges or 140 minutes of “on time” with a fully charged device.
  • Shock Charge Time: Charge times with a fully charged device: 200 joules in less than 9 seconds, 360 joules in less than 15 seconds.
  • System Recharge Times: Recharge times with a fully discharged device: able to deliver 6 shocks or provide 42 minutes of operating time after 24 hours of recharge time and 20 shocks or 140 minutes of operating time after 72 hours of recharge time with a new CHARGE-PAK battery charger at temperatures above 15°C (59°F).
  • Controls: Lid Release/ON-OFF - Controls device power. Shock button delivers defibrillation energy.
  • Electrical Protection: Input protected against high voltage defibrillator pulses per IEC60601-1/EN60601-1
  • Safety Classification: Internally powered equipment.IEC60601-1/EN60601-1.

User Interface

  • User Interface: The user interface includes voice prompts, audible tones and graphic prompts.
  • Readiness Display: The readiness display shows the device status.
  • OK Indicator: Shows “OK” when the last self-test was completed successfully. When the “OK” indicator is visible, all other indicators are not visible. The “OK” indicator is not displayed during device operation.
  • CHARGE-PAK Indicator: When displayed, replace the CHARGE-PAK™ battery charger.
  • Attention Indicator: When first displayed, at least six (6) discharges or 42 minutes of operating time remain.
  • Service Indicator: Service required when displayed.


  • Operating Temperature: +32° to +122°F (0° to +50°C).
  • Storage Temperature: -40° to +158°F (-40° to +70°C) with CHARGE-PAK battery charger and electrodes, maximum exposure time limited to one week.
  • Atmospheric Pressure: 760 mmHg to 429 mmHg, 0 to 15,000 feet above sea level.
  • Relative Humidity: 5 to 95% (non-condensing).
  • Water Resistance: IEC60529/EN60529 IPX4 “Splash proof” with electrodes connected, CHARGE-PAK battery charger installed.
  • Shock: MIL-STD-810E, Method 516.4, Procedure 1, (40 g, 6-9 ms pulse, 1/2 sine each axis).
  • Vibration: MIL-STD-810E, Method 514.4, Helicopter - category 6 (3.75 Grms) and Ground Mobile - category 8 (2.85 Grms).

Default Settings

  • Energy Sequence: Energy sequence is set to 200J, 300J, 360J.
  • Motion Detection: The motion detection system is set to on during analysis.
  • Energy Protocol: The energy protocol is set to increase energy only after a lower energy shock was unsuccessful.
  • Stack Shocks: Stack shocks option is set to off.
  • Turn-On Prompt: The turn-on prompt is set to provide voice prompts upon power on.
  • CPR Time: The CPR Time is set to 120 seconds.
  • Voice Prompt Volume: The voice prompt volume is set to high.

Data Storage

  • Memory Type: Internal digital memory.
  • ECG Storage: Dual patient data storage. Minimum 20 minutes of ECG stored for the current patient, summarized data stored for the previous patient.
  • Report Types:
    • Continuous ECG – A continuous patient ECG report.
    • Continuous Summary report – A summary of critical resuscitation events and ECG waveform segments associated with these events.
    • Event Log report – A report of time stamped markers, which reflect operator and device activity.
    • Test Log report – A device self-test activity report.
  • Capacity: Minimum 200 time-stamped event log markers.
  • Communications: Wireless transfer to a personal computer.
  • Data Review: Physio-Control provides an array of tools to meet customer needs for data viewing and analysis.

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency Converter

Choose a currency below to display product prices in the selected currency.

United States United States Dollar

Add to Wish List

Click the button below to add the Physio-Control LIFEPAK Express Defibrillator to your wish list.

You Recently Viewed...